So I have some Rosemount 8712 Flow transmitters that require a local disconnect. They are rated 24VDC - about 1A.
This is an explosion proof environment, and the customer recommended Crouse-hinds switches - of which I found the snap switches.
https://www.cesco.com/resources/pdf_467/ID-BRO-v1-eds-efd-snap-switch.pdf
All I need is a single-pole disconnect - but I notice these only have ratings for AC. I know AC and DC circuit breakers work differently, but this appears to be just a switch. I shouldn't have any issues hooking one of these up to a transmitter, right?
This is an explosion proof environment, and the customer recommended Crouse-hinds switches - of which I found the snap switches.
https://www.cesco.com/resources/pdf_467/ID-BRO-v1-eds-efd-snap-switch.pdf
All I need is a single-pole disconnect - but I notice these only have ratings for AC. I know AC and DC circuit breakers work differently, but this appears to be just a switch. I shouldn't have any issues hooking one of these up to a transmitter, right?