New to Siemens

geniusintraining said:
It sucked at best... I used it a couple times and did not have any luck, if they (Leukic) have a bunch of AB they should just stick with it, if I were doing the conversion then the 1200 would be the PLC I would take, but thats me :D
Click to expand...


i missed that the first time around, agreed.
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
4
Views
50
joseph_e2
J
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
110
bkottaras
B
J
Emergency Stop reset Siemens
Hi need help why this “failure 5 emergency stop “ appears at every startup in the morning ? Have to shut off main switch at least 10 times on...
2
Replies
19
Views
285
John Lee
J
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
99
mk42
M
D
Siemens
Hi everyone hope you'll well. Is it possible for me to download a Crack version of tia portal v13..sorry to say this but the software is very...
Replies
5
Views
196
Puddle
P
Back
Top Bottom