1756-esmcap lifespan

Jmeadows7676

Member
Join Date
Oct 2013
Location
Alabama
Posts
160
Does anyone know off the top if there is an lifespan on the 1756-esmcap modules found in 1756-L7 PLCS? I was asked this question and done a little searching but can't seem to find a recommendation on replacement interval if any. :confused:

Thanks, for the Help
 
OK, I called my Local Rockwell Rep and he sent me Knowledge base article 114726, covers it pretty well. 10+ years life span.
 
Old thread posts, but THANK YOU!

I know this is an old post but I have to say thank you for the information. I have spent the past hour searching google and Rockwell Knowledge Base without finding the answer. They sure didn't make that TechNote easy to find in their database...
 

Similar Topics

We are in the process of converting our plants from PLC5 controllers and 1771 I/O into ControlLogix PLCs and Logix I/O. Up until now we used 1756...
Replies
1
Views
45
Hello all, I have a 1756-EN2TR dual-port Ethernet IP Module attached to my 1756-L73 PLC. I currently have hazard symbols over both the top and...
Replies
3
Views
72
Hi all I have a ControlLogix 1756-L71SP that i want to use for general PLC applications, not safety. I am running Studio5000 v33, i can't...
Replies
2
Views
101
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
Replies
14
Views
429
Hi, I have two quick questions: 1- Could I use 1756-IA16/A with TTL inputs? Sourcing (PNP)? Sinking (NPN)? Either one? 2- What does /A in the part...
Replies
6
Views
184
Back
Top Bottom