isaacchandler99
Member
Our company has many of Rockwell's beloved NET-ENI modules to get SLC 5/03's onto our network. They have the issue of faulting out if more than 3 devices try to communicate with them. I've heard there is a way to send a message to the module from the PLC to reset them using a MSG instruction. It is described somewhat in the user manual 1761-UM006E but not in enough detail for me to figure it out. On page 4-13 it describes using a 485CIF write (aka a PLC2 unprotected write) to node 248 for save/reset. Has anyone done this before?
