How to configuration 1794-IP4 in Control Logix over controlnet network?

pratap_awate

Member
Join Date
Jan 2010
Location
Pune
Posts
1
Hello,
I have Control Logix 1756-L63 processor with 1756-CNB module.
On controlnet network there is Flex frequency counter 1794-IP4 module through adapter 1794-ACN15.

Can any one guideline me how to configure this module using RSLogix5000 Ver 16.00.

I have tried 'MSG' instruction to Block transfer Read and Write. In Message Configuration, Communication tab, i have checked to ControlNet, also given path for 1794-IP4.

But it didn't communicate with IP4 module, show Extended Error Code 16#0000_0114 means 'Wrong Module'.

I really need help on this.
 

Similar Topics

I have to configure new 1794-ADN Series C in my devicenet network. I have downloaded the EDS File and registered it. But while configuration in...
Replies
3
Views
1,010
Hello everyone. I have installed a remote Flex i/o enclosure with a AENTR ethernet adapter and an 1794-IR8 RTD card. I have landed 4 RtdÂ’s on...
Replies
0
Views
773
Hello everybody, I am using SLC 5/05 processor. and used with 1747- SN RIO Scanner. and used 1794 ASB adapter. used 8...
Replies
0
Views
6,993
In our production plant we have multiple different networks (subnets). IT dept have setup routing between them so different subnets can...
Replies
0
Views
49
Can somebody share the AutroSafe configuration Tool C4.11.4 Thank you
Replies
1
Views
72
Back
Top Bottom