I am currently running revision 17.1 on a L45 series B AB processor to control a SEW PLC with 2 SEW inverters. There is no issues communicating with a SEW PLC with this revision.
I attempted to update to version 20.03 on the L45 processor and the SEW network is faulting out, several motor faults spread out between 2hrs and 2 minutes, very inconsistent. I was just wondering if there is someone else out there that has run across this?
Any advise would he helpful.
I attempted to update to version 20.03 on the L45 processor and the SEW network is faulting out, several motor faults spread out between 2hrs and 2 minutes, very inconsistent. I was just wondering if there is someone else out there that has run across this?
Any advise would he helpful.