Studio 5000 mouse problems

I got a new/off lease Windows 7 Pro laptop. I use a Microsoft wireless mouse. 4000 series I think. It worked correct on my old laptop. Same Studio 5000 software. With the new laptop the scroll wheel is reversed and when I view my Tags it will not scroll. I have to go to the bar on the right and drag it up or down.
It scrolls the correct direction in everything else, spread sheets, Internet Explorer etc..
Pull the wheel back toward you and the page goes down. Roll the wheel up and the page goes up. But is reversed in Studio 5000.

http://www.plctalk.net/qanda/showthread.php?t=52320

The above thread may help you out.

Regards,

berrabbit5849 said:

I got a new/off lease Windows 7 Pro laptop. I use a Microsoft wireless mouse. 4000 series I think. It worked correct on my old laptop. Same Studio 5000 software. With the new laptop the scroll wheel is reversed and when I view my Tags it will not scroll. I have to go to the bar on the right and drag it up or down.
It scrolls the correct direction in everything else, spread sheets, Internet Explorer etc..
Pull the wheel back toward you and the page goes down. Roll the wheel up and the page goes up. But is reversed in Studio 5000.

Click to expand...

Hi my friend,

Yes, the reversing scroll issue for RA programming software is quite old and has been around for some time now...

721215 - RSLogix 5000 - scrolling is operating backwards
Access Level: TechConnect

Setting your mouse wheel vertical scrolling to "The following number of lines at a time" will hopefully sort this issue for you. The default being 3 lines at a time.

Regards,
George