YOU DON'T HAVE TO "MATCH" THE DRIVE IF, AFTER DOWNLOADING TO THE CONTROLLER, THE DRIVE SHOWS UP WITHOUT ANY "!" MARKED YELLOW TRIANGLE!
I was just telling you what you might encounter after downloading; I have had issues with numerous Rev.9 PFs which, even after had their AOPs installed and were properly configured within the Offline RSL5K application did not want to be "recognized" by the controller.
If this is the case, you will have to "Match" the drive in the Offline application then Download to CPU, however, make sure you have an old copy of the file since, after a successful "Match" you will have to edit all the parameters which were not at Default values in the old, functional application.