PVplus 600 auto-launch after download

On all of my PVplus 700's; once the download is complete, the HMI restarts with the new .MER file.

On my 600, I have to exit to configuration and load it. What setting am I missing?

I've got 2the 711p-um006_en-p manual

I'm not seeing it in Terminal Settings > Startup Options

On a 600 after loading the application you have to go to terminal settings/startup and select to boot to last loaded program. They come default to boot to config screen.

Or, as part of the download, select the Run on Startup check box. That changes the setting JaxGTO mentions.

OG

good to know that.
Thanks!