Question on S5 & S7 Conflict

hagos

Member
Join Date
Oct 2004
Location
Africa
Posts
244
Hi Sparkies,

Does S5 conflict with S7 in any way?.
Let me tell you about what I have.

I have a Laptop with Step7 (Simatic Manager from Siemens) installed.Recently I bought S5 for Windows from IBH (Version 5.02).

The question is:Can I proceed & install it in my laptop along with my Step7?Is there any fear that it might conflict with Step7?Frankly my fear is to lose my Step7 authorization.

Has any one of you installed both systems b4?

I appreciate your valuable replies(as usual)

Be good
Hagos
 
I have both Step7 5.3 old step5 dos and s5/s7 for Windows from IBH installed on my machine running on Win2000 sp4 without any problems.
 
Hi Folks,

I forgot to tell you that my operating system is Windows XP

I've got a reply that the system is operational in Windows 2000, does any one run it on XP?

Cheers
Hagos
 
I have about the same configuration as Bratt, but on Wondows XP SP1. It works without any problem. I hear you have to keep away from XP SP2 if you want to avoid troubles, so I stick with XP SP1.

Kind regards,
 

Similar Topics

Hello again..trying something on an existing poorly written program and just wanted to double check something system is an A-B MicroLogix 1200 In...
Replies
5
Views
106
Good morning! Let me start by saying, I am still learning about this type of HMI programming. I recently watched a video about recipes and how it...
Replies
0
Views
51
I have some logic that I have written within a 5380 series controller that tracks the time an event is started, while the event is running an RTO...
Replies
2
Views
79
I have an HMI 2711R - T4T Series B, and I want to know which PLCs, besides Micro 820, can communicate with it.
Replies
2
Views
80
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
70
Back
Top Bottom