Panelview Plus 600--internal battery

Skidood

Member
S
Join Date
Oct 2016
Location
Ontario
Posts
213
Hi all....I have a customer that was told that their Panelview Plus 600 will eventually fail due to the internal non-replaceable battery dying. Is this even remotely true? P/N is 2711P- T6C20D Series D
 
The PanelView Plus 400/600 terminals contain a lithium battery that is permanently connected. The battery is not field replaceable.


I have not replaced one. There is a knowledge base saying to contact your distributor to send your terminal for repair in order to replace the battery.


#672562
 
Last edited:

Similar Topics

B
Firmware update for older (CF card) PanelView Plus 600
Hi I have a number of the older PanelView Plus 600 HMI's (2711P-T6C20D, Ser D) that I want to update to the latest firmware. I believe that the...
Replies
10
Views
447
bgtorque
B
R
AB PanelView Plus 600
Hello , I have an HMI of PV+ 600 (2711-T6M5D) Ser A Rev B, This HMI doesn't have the ethernet port i have to take backup through communicate...
Replies
5
Views
646
hardaysknight
H
E
PanelView Plus 600 USB at startup
Hello all, I copied the MER file from one PanelView Plus 600 to another one, using a USB drive. On the new HMI, I copied the MER file to the...
Replies
4
Views
624
Elcan
E
T
PanelView Plus 600 only wants to load PanelView Plus 7 MER?
Hi all, I have an old PanelView Plus 600 (2711PC-T6C20D8) that I am repurposing on our site - I have flashed the firmware to ME version...
Replies
4
Views
972
JesperMP
JesperMP
E
AB Panelview Plus 600
Hello Team, I have a question, I have been working with a panelview plus 600. But I have deleted all the .mer directly from the HMI, after that I...
2
Replies
16
Views
1,690
arpus4KM
A
Back
Top Bottom