Jetter to Profibus

Martin IRL

Member
Join Date
Jan 2003
Location
Ireland
Posts
25
Hi Guys,

I need to connect a Jetter Nano C controller to a servo drive, the servo drive has a Profibus D and CAN bus network options. Has any one ever did this, if so I would appreciate if you could share with me how you did it.

Thanks & regards

Martin
 

Similar Topics

Hello all, I have an old Jetter Delta CPU (D-CPU) PLC. The PLC just died (No light on the RUN, or Error). I replaced the failure PLC with the...
Replies
3
Views
1,662
I am confronted with an aged German machine containing Jetter Nano-C PLC and Jetter DIMA3 Servo drive. In the manuals I found online it mentions...
Replies
2
Views
2,406
Good morning. I need a regular JETTER 647 procedures and programming manuals, please let me download the address. Thanks!
Replies
4
Views
1,906
I have some manuals of jetternano... anyone help me out regarding my previous question ??? redlion hmi communication with jetternano plc?????
Replies
3
Views
2,803
dear all, i want communication manual of jetternano. actually i want to communicate jetternano with redlion hmi.if anybody know...
Replies
0
Views
2,008
Back
Top Bottom