Austin1985 Member A Join Date Mar 2016 Location Indiana Posts 20 Apr 19, 2016 #1 Does anyone know off hand how to disable the start signal from a PowerFlex 20-HIM-A6? I've been looking through the manual but I'm not too familiar with these HIM's.. Thanks!!
Does anyone know off hand how to disable the start signal from a PowerFlex 20-HIM-A6? I've been looking through the manual but I'm not too familiar with these HIM's.. Thanks!!
Mark Snodgrass Member M Join Date Dec 2010 Location Burlington, NC Posts 402 Apr 19, 2016 #2 In the manual(pg 3-50 for series A or pg 3-47 for series B) is parameter 277- Start Mask. Bit 1 is for the HMI which is DPI port 1.
In the manual(pg 3-50 for series A or pg 3-47 for series B) is parameter 277- Start Mask. Bit 1 is for the HMI which is DPI port 1.
Austin1985 Member OP A Join Date Mar 2016 Location Indiana Posts 20 Apr 19, 2016 #3 OK, thanks! I didn't realize it is called Mask, so my "ctrl f" method wasn't working while hunting through the manual. Again, thanks..
OK, thanks! I didn't realize it is called Mask, so my "ctrl f" method wasn't working while hunting through the manual. Again, thanks..