Old Honeywell Software?

BAJ

Member
Join Date
Jan 2006
Location
Maple Grove, MN
Posts
201
Anybody know what software is needed to connect/debug a Honeywell 9010-016C 9100E Logic Processor Controller? Looks pretty dang old.



I have a customer with a bunch of these which they would like a quote to replace, but would like support in the meantime.


Thanks,
-Brad
 
That is the OLD Honeywell Series 9000 software....late 1980s to early 1993 or so.
Those were actually "York" plcs (bought by Honeywell), pretty good in their day.

You will need Honeywell S9000 software to program...I think windows 3.1 or 3.3. You will also need "Gateway module" to connect to plc from HW S9000 software...whopping 9600 baud speed.
I assume your customer has this system?

You can also go in the "back door" with 623-60 plc software (DOS only).
 
Yes that is the gateway..


I used to have a copy of the software....I will have to dig thru my archives....no promises.
What was your customer using these PLCs for, did they have a Scada/HMI system communicating with them?
 

Similar Topics

Hey guys, I am trying to pull the ladder logic out of some ancient Honeywell S9000 PLCs, but I can't find the software anywhere (google search...
Replies
10
Views
4,833
Hey all, I am currently working on a depalletizer for a customer and we are doing a hoist upgrade. This is a SLC500 processor and the drives are...
Replies
6
Views
182
Hi, One of my customers has an old fabric tensile testing machine. The IC # AD7501KN of its controller has malfunctioned. This IC is related to...
Replies
1
Views
62
I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
177
I have a old lathe with a 120 VCA 9.5 AMP motor. Has white, black and red wires. I need to find a way to connect it to a variable speed controler...
Replies
0
Views
89
Back
Top Bottom