On one of our conveyors we have a height verification sensor that is triggered by a photo eye as product passes by. QA wants another sensor to take snapshot of the temperature as well. Due to a lack of places to mount the sensor I had to put it 10 inch’s diwn the line and using a separate sensor to grab the anal value in the plc.
If the first validation check fails, I want to pass on that particular item on the second sensor. I don’t want to log 2 failed products if 1 item fails both validation points.
As product fails the first check, it’s very likely that a passed item is going through the second check point and possibly another item inbetween the too points.
As is, is my best option to time up when to ignore check B if check A fails?
If the first validation check fails, I want to pass on that particular item on the second sensor. I don’t want to log 2 failed products if 1 item fails both validation points.
As product fails the first check, it’s very likely that a passed item is going through the second check point and possibly another item inbetween the too points.
As is, is my best option to time up when to ignore check B if check A fails?