1761 Net ENI Ser: D F/W:3.22

DCom

Member
Join Date
May 2016
Location
Conroe
Posts
20
Did Rockwell discontinue their NET ENI Configuration Utility Software? I searched their site and many other sites on different search engines but to no avail. I am in need of the software to program one.

Thanks In Advance
 
You can do most of what you need to program via telnet.

telnet 192.168.1.1 1500 (substitute your IP address)

For other parameters you can message the nodes using a message instruction from your PLC.
 

Similar Topics

Good afternoon guys, does anyone recommend a direct replacement part for Allen Bradley's 1761-NET-ENI devices? We have a lot of these in our plant...
Replies
9
Views
973
Hello, currently I have a micrologix 1200 (1762-L40AWAR )connected to an HMI panelview 600(2711-T6C3L1X) via the 1761-net-aic module, I want to...
Replies
13
Views
1,750
I have decided that instead of upgrading the drives & plc at the same time on my project i would just do the drives for now as just getting them...
Replies
23
Views
8,909
Our company has many of Rockwell's beloved NET-ENI modules to get SLC 5/03's onto our network. They have the issue of faulting out if more than 3...
Replies
2
Views
1,892
Our company has many of Rockwell's beloved NET-ENI modules to get SLC 5/03's onto our network. They have the issue of faulting out if more than 3...
Replies
0
Views
1,300
Back
Top Bottom