I am looking to receive remote support on a Kinetix drive. I am having trouble getting one to work, and I don't have time to go back and forth. I use teamviewer for remote support, please let me know if you are interested.
Kinetix 5500 support
- Thread starter xertechx
- Start date
Similar Topics
Hello gentlemen,
I have Allen Bradley Servo drive(P/N: 2198-H040-ERS) in stock.
However, the servo motor should be Allen Bradley VPL-B1003F...
Hi guys!
I have 3 servos for X,Y,Z axis controlled by Kinetix 5500.
In Studio 5000 there is one Predefined tag in AXIS_CIP_DRIVE called...
Hi all, New here and new all round to PLC`s. We have a servo drive that runs a cross travel beam backwards and forwards. I am having trouble with...
Hi all,
Maybe silly question but want to make sure. I have not found anything in the manual about that..
On Kinetix 5500 you can use either 1Ph...
