FactoryTalk View Translation Utility
- Thread starter CannM1
- Start date
You will need a TechConnect support contract to access KB 481190 at the AB website.
Copy & paste below..
Language Translation Utility for FactoryTalk View Site Edition and FactoryTalk View Machine Edition 481190 | Date Created: 04/10/2012 | Last Updated: 02/19/2018
Access Level: TechConnect Email this page
Print Subscribe to Updates
Question
What is the Language Translation Utility for FactoryTalk View Site Edition and FactoryTalk View Machine Edition?
Disclaimer
User created application strings are translated using machine translation software powered by a third-party service....
Copy & paste below..
Language Translation Utility for FactoryTalk View Site Edition and FactoryTalk View Machine Edition 481190 | Date Created: 04/10/2012 | Last Updated: 02/19/2018
Access Level: TechConnect Email this page
Print Subscribe to Updates
Question
What is the Language Translation Utility for FactoryTalk View Site Edition and FactoryTalk View Machine Edition?
Disclaimer
User created application strings are translated using machine translation software powered by a third-party service....
Similar Topics
Hi all,
I created a project and I made the translation into Russian, I modified the excel file without any problems and the Russian translation...
Hello, I'm using FactoryTalk View ME V10.
I created a valve as a global object with multiple parameters and when the object is being used at the...
Hello all,
I was modifying an HMI in factory talk and went to change a go to display button using the ... to select from a list as I had done...
Hello,
We recently upgraded our control server to a newer model. After the transition we are experiencing issues with our trend graphs to where...
Hi,
I wanted to ask is there a way to have a visibility expression use the IP address of the HMI (Dynics, not PV) to show certain elements? The...