Hi Bob
I don't think there are many SAIA users among the lurkers here, so I would be surprised if any here had the software.
Neither do I since the the company I work at, throw the software in the bin some year ago...
In fact, only one of my older colleaques support PCA at some degree, and he prefere the old HW programming tool. A hardware box at the same size as a PC cabinet....
I checked the support page, but there was only PCA documentation/manuals and not the PCA software
http://www.sbc-support.ch/pca/pca.htm
There is an unofficial PC
D forum in Germany:
http://www.pcd-forum.de/ E.g. in "Forum-Taverne" there is a PCA post.
It is in german, but there are also english questions that get answers in english.
I see that your location is in Ohio. You know of course that SAIA-Burgess headquarters in North America, is located in Vandalia, Ohio?
The Saia PCA, by the way, has been running a Schneider KS-Master restacker just fine for over 20 years!
As you probably know, Switzerland is also known for their clock's that also run for years...
When we replace PCA with PCD series, it's not because HW errors, but because of our PCA software support...
regards