SAIA software

I got a second hand Saia PLC type PCD1.M120 which should still work properly. I also got the original software titled "PG5 1.0" but without code.
Can somebody help me in this matter please, so I can use this PLC?

Thanks already,
Vincent

Sorry, but it is not a code, it is the license disk to unlock to the full version

Hi Vincent

Here are some links:

PCD1 manual: http://www.sbc-support.ch/pcd1/mxxx/m1x0/pcd1m1x0.htm
Drawing of the download cable should also be in that manual.

Be aware that the PCD1.M120 doesn't have battery, but instead a super-cap. with about 7+ days data protection!

PG5 software support page (documentation and software):
http://www.sbc-support.ch/pcd8/pxxx/pcd8p5.htm

Pg5 v1.0 is obsolete, but on the support-page there is a full version of PG5 v1.2.130, running for 90 days.

I don't think your key-disk will work on this demo-version.

Note also that your key-disk include the name of the original owner...


You could also contact this adress:

Saia-Burgess Benelux
Mechelsesteenweg 277
B-1800 Vilvoorde
Belgium

Phone: +32 (0)2 456 06 20
Fax: +32 (0)2 460 50 44


BTW: Within an hour you is able to edit your original post