I am trying to establish a remote tcp/IP connection to a Omron HMI touchscreen model ns8-tvo1b-v1. We have the NS designer software. Which if I understand correctly we can use to establish a direct connect to our CJ1M cpu2 processor. We can ping the set IP address on the touchscreen so we know our lines are good. We also installed PC anywhere software on the remote computer with cx programmer and NS designer. However we cannot establish a connection using NS designer.
on the remote PC. Any suggestions would be appreciated. or any suggestions as to a better and more reliable method.
on the remote PC. Any suggestions would be appreciated. or any suggestions as to a better and more reliable method.