Studio 5000 'live view' function

Mikeve12 · Nov 7, 2018

Hi everyone,

Does Studio 5000 v31.11 have a function for 'live view'
I'm trying to find out what tags are linked to what input/output

DonBlack · Nov 7, 2018

Do you mean going online with the processor? Go to communications-who active, then browse to the controller and click go online. Then you will be able to watch the live status of the tags. Also , you can right click any tag and go to cross reference , this will show you anywhere in the program it is used.

Mikeve12 · Nov 7, 2018

DonBlack said:
Do you mean going online with the processor? Go to communications-who active, then browse to the controller and click go online. Then you will be able to watch the live status of the tags. Also , you can right click any tag and go to cross reference , this will show you anywhere in the program it is used.

Yeah, I didn't know it worked like that, thanks! Now I just need to find out why I can't see any input coming in, I've tried forcing an output aswell but.. nothing

mylespetro · Nov 7, 2018

Mikeve12 said:
Yeah, I didn't know it worked like that, thanks! Now I just need to find out why I can't see any input coming in, I've tried forcing an output aswell but.. nothing

Have you checked that you're not in Remote Program mode, but are actually in Run mode?

Mikeve12 · Nov 7, 2018

mylespetro said:
Have you checked that you're not in Remote Program mode, but are actually in Run mode?

Yes, But I also can't see anything in run mode, I was even able to import all the tags from the IO module but still nothing

janner_10 · Nov 7, 2018

Is it wired correctly first?

Studio 5000 'live view' function

Mikeve12

Member

DonBlack

Member

Mikeve12

Member

mylespetro

Member

Mikeve12

Member

janner_10

Lifetime Supporting Member

Similar Topics