motor oscillating with an encoder

tarek merhbi

Member
Join Date
Dec 2018
Location
north lebanon
Posts
1
hello everyone i am willing to program a tempered glass machine,
the principal of it is the glass enter the oven and oscillate from the start to the end of it and rerun this process
the problem is how can i know how much the distance to taking it to the end and to the start.

i am using delta plc and delta vfd

thanks in advance
 

Similar Topics

Hello all, In my facility we have multiple 3HP 460V motors that are being controlled by VFDs which drive conveyor belts. The drives are randomly...
Replies
2
Views
173
Hi everyone, This is my first time posting, so please forgive any omissions or mistakes. I am attempting to control the velocity of a stepper...
Replies
18
Views
741
Kindly, has anyone tried to control Lenze servomotors with Siemens S120 drives ? Any special hints ? Have some concerns for the resolver and servo...
Replies
5
Views
178
Dear Members, Hello, we are working on a project and facing an issue with the plantpax 5 PMTR library, we have a bidirectional motor, which has 2...
Replies
6
Views
185
Hi all, New here and new all round to PLC`s. We have a servo drive that runs a cross travel beam backwards and forwards. I am having trouble with...
Replies
3
Views
134
Back
Top Bottom