Is there an availaible exemple somewhere or an ''how to doing it''
I have 5 micro 1400 cpu to be controled by 1 controllogix using ethernet/IP network
I would like to do all the communication work inside the contrologix if possible (Reading and writting)
I'm aware about the data adressing difference between RS500 and RS5000 so i wouldn't start in the wrong way
Any help would be appreciated
I have 5 micro 1400 cpu to be controled by 1 controllogix using ethernet/IP network
I would like to do all the communication work inside the contrologix if possible (Reading and writting)
I'm aware about the data adressing difference between RS500 and RS5000 so i wouldn't start in the wrong way
Any help would be appreciated