HI need help, I have this set up
PC- ip address is 10.104.43.123, 255.255.255.0
NATR-Public ip address is 10.104.43.217, 255.255.255.0
-Private ip address is 192.168.0.85, 255.255.255.0
NAT Rule: 10104.43.216 > 192.168.0.80
PLC- ip address is 192.168.0.80, 255.255.255.0
what should I do since I cannot ping my plc?
PS: I just want to know if there is another way to communicate with the PLC, because there is a situation where in the plc is in operation, the end user cannot take risk of redownloading the program because a fault may occur. So Im gathering sources if theres a way to communicate with the plc using NATR without assigning gateway address to plc.
Thanks
-james