Problem creating variable tag array Citect 7.4

I'm having a problem creating variable tag array in Citect SCADA V7.40. I looked every possible help, user guide... but no matter how i set array I cannot change value of any element of array beside first one.
I configured my variable tag as shown below:
Tag name: TestArray
I/O Device: Internal (it's an OPC Factory Server)
Address: V500[5], %MF4000[5], I2[5], F2[5] (I tried every one of these for REAL or INTEGER type based on user guide/forum posts)
Data type: REAL, INTEGER

I tried every one of these but without success. If i try to set value of variable tag array element, example TestArray[1] and TestArray[4], by typing value in Number field (in Citect Runtime) every element of an array is giving me message #ERR, except first one.
Other than that in Citect Runtime in All variable tags window, I can see TestArray tag as a single tag, not as an array
Note that i'm not using these tags in Cicode but in Graphic Builder / Runtime. I need about about 50 user defined value tags to be sent to SQL DB by SCADA so remote PLC can read those values in order to define state of outputs.
I would highly appreciate any kind of help, any tip. Thanks in advance!

Trie with:

ADRESS!A[5]

poprcac_1989 said:

I'm having a problem creating variable tag array in Citect SCADA V7.40. I looked every possible help, user guide... but no matter how i set array I cannot change value of any element of array beside first one.
I configured my variable tag as shown below:
Tag name: TestArray
I/O Device: Internal (it's an OPC Factory Server)
Address: V500[5], %MF4000[5], I2[5], F2[5] (I tried every one of these for REAL or INTEGER type based on user guide/forum posts)
Data type: REAL, INTEGER

I tried every one of these but without success. If i try to set value of variable tag array element, example TestArray[1] and TestArray[4], by typing value in Number field (in Citect Runtime) every element of an array is giving me message #ERR, except first one.
Other than that in Citect Runtime in All variable tags window, I can see TestArray tag as a single tag, not as an array

Note that i'm not using these tags in Cicode but in Graphic Builder / Runtime. I need about about 50 user defined value tags to be sent to SQL DB by SCADA so remote PLC can read those values in order to define state of outputs.
I would highly appreciate any kind of help, any tip. Thanks in advance!

Click to expand...

This may be an OPC driver issue, are you sure it will allow writes to individual elements of an array ?

Have you tried a different driver to check it works ?