kinco hmi siemens s7 1200

magdyhamada2002

Member
M
Join Date
Dec 2013
Location
giza
Posts
5
good morning
can anyone help me to connect kinco hmi with plc Siemens s7 1200 using tcp and can i have simple project for plc and hmi
thank you and best regards
 
Good morning everyone
I make connection between Kinco HMI with Siemens PLC s7 1200
First I make factory reset to my PLC then I start to connect my PLC with indusoft scada using sieth driver and use the PDF help file for driver and make good connection then use my Kinco HMI and I have connection between indusoft scada and PLC s7 1200 and Kinco HMI using TCP IP system
Any one need help can mail me at
[email protected]
 

Similar Topics

O
AB Micro 830 and Kinco HMI
Hi, Its possible communicate between kinco hmi (mt4404t) and Micro830 through a serial line ( rs232/485 ) ?
Replies
2
Views
1,553
goghie
G
W
Unable to communicate between HMI & PLC KINCO
Can anyone help me getting this communications connection set up between KINCO GL100 and KINCO K508-40AR? I am using Port 1(RS485) on the KINCO...
Replies
1
Views
3,296
jets
J
O
Kinco HMI and S7-1200 (RS485)
Hi all. Are someone was tried to connect HMI with only serial port ( rs232/485 ) to a PLC (S7-1200 + CM 1241 RS485 ) I have a machine, where is a...
Replies
0
Views
1,242
Oliver Micka
O
F
Kinco HMI Datalogger
Does anybody have experience with the data logging on a Kinco HMI? I'm currently trying to log some dumb data. I have already created the DB and...
Replies
0
Views
1,078
felix.vl
F
M
Kinco HMI connection with Mitsubishi FX1S PLC
I am trying to connect a Kinco HMI (T070) with the PLC of Mitsubishi (fx1s) but I want to know how can I add PLC tags to HMI Buttons (when I will...
Replies
4
Views
2,965
MohsinJahan
M
Back
Top Bottom