Two 20-750-ENC-1 in one PF755

asdf6

Member
A
Join Date
Apr 2018
Location
Vancouver, BC
Posts
15
Is it possible to use two single encoder cards (20-750-ENC-1) in one VFD (PF755) as apposed to using a dual encoder card (20-750-DENC-1)?

Trying to work with what is currently available as i am currently doing commissioning.
 

Similar Topics

R
Replacing a Impact 1336-L6E/L9E with a 20-750-ENC-1 . Looking for wire example.
Good Morning , I am replacing a Allen Bradley 1336 Impact drive with a PowerFlex 755. The 1336 had a 1336-L6E /L9E w/ Encoder board in it ...
Replies
0
Views
1,882
Rob S.
R
U
Setting up WAGO PFC 200 750-8216 as a Profibus Slave
Hello, I am in possession of a WAGO PFC 200 750-8216 which I was successfully able to set up as a Modbus RTU Master to a slave device using...
Replies
0
Views
72
udit_91
U
W
Wago Remote IO rack with a 750-652 serial card configured for Modbus on a AB L72 PLC
I have a project to setup base programs across multiple PLC platforms that can be used for Modbus communications to various sensors that have...
Replies
0
Views
113
Whatsup
W
S
Wago 750-862 Auto-run problem
Hello, I m having a problem with wago 750-862 plc. The plc won't start automatically in run mode after a power reboot. I've also tried the...
Replies
4
Views
338
sumit.sharma
S
E
Wago 750-8100
Hello everyone, I am trying to setup a Wago 750-8100 PLC to send a text message out via ethernet port, if I get a Digital input that is true. I...
Replies
0
Views
342
ESPIjessc
E
Back
Top Bottom