Conical vessel volume based on level
- Thread starter gottspeed
- Start date
Something like this:
r1=bottom radius
r2=top radius
ract=radius at actual height
Full truncated cone
V=1/3π(r1²+r1r2+r2²)h
ract=r1+(r2-r1)*(h/hrange)
h/hrange = actual height percentage in 0-1
Your actual volume:
V=1/3π(r1²+r1*ract+ract²)h
r1=bottom radius
r2=top radius
ract=radius at actual height
Full truncated cone
V=1/3π(r1²+r1r2+r2²)h
ract=r1+(r2-r1)*(h/hrange)
h/hrange = actual height percentage in 0-1
Your actual volume:
V=1/3π(r1²+r1*ract+ract²)h
Similar Topics
Hi
I need some help to figure out what the equation is for calculating the volume of a conical tank.
So far i know that the volume equation is...
I did an application 2 years ago where I need to know level in a pressurized tank and the system had an existing sight-glass that I took advantage...
This is more of a VFD question where a PLC is used to monitor/trend several datalinks. The application is to tilt a vessel with two AC motors...
HI,
In a mixing vessel tank, it was maintained with a product temperature of 70 degree.
When vacuum applied to the tank, the product and jacket...
dear,
i have booster pumps that are running on pressure based on the pressure transmitter that comes with the booster pumps kit and there are...
