Connecting Cable ZEN CIF01

gfranco

Member
Join Date
May 2008
Location
RIZAL
Posts
10
Good day!Anybody knows about ZEN CIF01 connecting cable?
when I using the usb serial port w/ my new Laptop,I cannot connect with ZEN controller. But if I used the old Laptop w/ built in serial port connection is made. Do anybody got experience on this.thanks
 
Found this info but I don't know anything about this controller.
See this link, page 2.
http://www.omron247.com/doc/pdfcatal.nsf/6AA75F7E52C411588625720400614FAB/$FILE/D11ZEN0107.pdf

You might need this driver also, if you are using Windows Vista.
Link:
http://forums.mrplc.com/index.php?download=768

C & P from that page:




Note:
For notebook computers that do not have an RS-232C serial port,


connect the computer to the ZEN by connecting an

OMRON CS1W-CIF31 USB-Serial Conversion Cable to the

ZEN-CIF01 Connecting Cable.

 
Last edited:

Similar Topics

For connecting to a Micrologix through a 1761-NET-AIC, the manual specifies that you should use "RS 232 Communication Cables Cable, Cat. No...
Replies
0
Views
1,365
Hi there guys, At work we have some Siemens S7-1200 PLCs and have just got the Step 7 Basic software. Typically it has got to this point where we...
Replies
3
Views
1,556
Do this happened to any of you ? I just succeeded connecting a ml1400 true a new XPmode VM by the means of ethernet. I used a direct cable from...
Replies
6
Views
3,682
Hi all :) we have one following PLC. Platform :controlnet Processor :PLC5/40C Series :E-2000files/extended we bought one USB to...
Replies
0
Views
2,170
Hi guys, I have a Siemens CP341-RS422/485 module and I am trying to establish MODBUS communication to a series of Multilin269 / 469 protection...
Replies
1
Views
6,254
Back
Top Bottom