Programming a spare Beckhoff CP6207 panel PC 5.7"

Transistor

Member
Join Date
Aug 2007
Location
Somewhere
Posts
25
We have a production unit and a spare unprogrammed panel.

Q1: Does anyone know if we can transfer the program from the running unit to the backup?
Q2: How?

Many thanks.
 
One precondition that has to be met before trying anything is that the source code was downloaded to the PLC (using specific command in TwinCAT) together with the compiled code.

1. Connect (establish route) to the Panel PC using programming PC (laptop, etc.).
2. In case of TwinCAT 2, you have to download the .tsm (TwinCAT System Manager -> File -> Open from target) and .pro (TwinCAT PLC Control -> File -> Open from PLC) files from the PLC. In case of TwinCAT 3 you just use option "Open Project From Target".
3. Connect to the spare Panel PC and download the files you acquired from running unit.
 
Last edited:
One precondition that has to be met before trying anything is that the source code was downloaded to the PLC (using specific command in TwinCAT) together with the compiled code.

1. Connect (establish route) to the Panel PC using programming PC (laptop, etc.).
2. In case of TwinCAT 2, you have to download the .tsm (TwinCAT System Manager -> File -> Open from target) and .pro (TwinCAT PLC Control -> File -> Open from PLC) files from the PLC. In case of TwinCAT 3 you just use option "Open Project From Target".
3. Connect to the spare Panel PC and download the files you acquired from running unit.


4. Online > Create Bootproject
5. Online > Sourcecode download
 

Similar Topics

New to vfds. I put in parameters. IP, but I get ethernet flashing and link solid. What did I do wrong?
Replies
1
Views
27
I'm been deciphering a program for a press here. I've gotten most of it deciphered using the manual to understand the instructions (first mitsu...
Replies
7
Views
53
Hello colleagues, Some time ago I started my adventure with programming. With your help and the courses, things are starting to come together...
Replies
13
Views
598
Dear All, I need a sample PLC program to count the output pulse of a mass flow meter so that a specific amount of mass (for example 100gm)can be...
Replies
2
Views
84
Hi Please I have zeilo smart relay #SR2A201BD but I don't have it's programming cable. Can I use any general usb/rs232 converter? Or need...
Replies
2
Views
80
Back
Top Bottom