Converting 14 pin to 25 BCD Switch Output

ataslaki

Member
Join Date
Mar 2003
Location
Greater Los Angeles Area
Posts
3
Did a search, but no help anywhere. So, this is a long shot here...

I have a BCD switch from Slo-Syn (Previously Superior Electric, previously Warner :rolleyes: ) which had a 25 pin IDE male output. Apparently they don't make this part any more, and the new BCD from the same company has a 14 pin output.

Neither the company, nor the distributor are of any help.

Does anyone know a conversion factor from the 14 to 25 pin? Or any other suggestions (short of go find another company)?

The part number I have from Superior is 221157-01.

Thanks.
 

Similar Topics

Hello everyone, can anyone help me with covert the STL code to ladder. Iam using plc s71200. A %DB1.DBX33.7 // angel of vaccum...
Replies
2
Views
175
Hello PLCs Forum, I am in a bit of a pickle and was hoping someone could offer me some help. I have a .rss file and just need to see the ladder...
Replies
2
Views
95
Hello nice to meet you, im new in here, I'm currently trying to convert code written in STL for a S7-400 to SCL for an S7-1500, because when i run...
Replies
5
Views
268
Hello, did anybody know, if there exist an converting cable like the1492-CM1746-M01 (for an 1746-IB16 to an 5069-IB16), for an 1746-HSCE to an...
Replies
3
Views
362
Hello, This will be my first time converting powerflex 40's and 400's from devicenet to ethernet. I did some research, and it seems I will need...
Replies
4
Views
699
Back
Top Bottom