Factory Talk View Machine edition

nikhilbcs

Member
Join Date
Jan 2017
Location
dubai
Posts
27
Hi All,

I am using factory talk view machine edition HMI software.
I am trying to use Firmware upgrade Wizrd to update firmware and to install KEP driver to HMI.
But while proceeding to the step of selecting KEP driver, i am not getting any driver for selection and it is not allowing me to further.

I tried to reinstall Factory talk View machine edition and KEP Server Enterprise V5.3 with all possible method but the above problem is not getting resolved.

Need your help to overcome this issue.

Please Revert if anyone had experience on it.. or any clue to solve.

error1.PNG error2.PNG
 
Last edited:

Similar Topics

Hi all, Attached below is an example of what is happening to our existing SCADA. It seems after patching some Rockwell Software that I thought...
Replies
9
Views
263
The client has an application that when communication between the PLC and the Factory Talk VIEW supervisory fails, the object in the supervisory...
Replies
5
Views
227
Hello all, I am looking for a way to have a user get logged out after an X amount of time because to default so that user privilages are no...
Replies
4
Views
507
Hello everybody. I was wondering if there is a way in FTVIEW Studio to close ) view after x min without interaction . My issue is the following...
Replies
2
Views
330
Is there a way to choose the base font in ME. Text in the Arial Unicode MS which is the default font on my FTVS doesnt show up properly on a...
Replies
1
Views
620
Back
Top Bottom