Can Factory Talk View Studio ME Run on a VM Ware

IdealDan

Member
Join Date
May 2017
Location
MA
Posts
480
Hi All
Can Factory Talk View Studio ME Run on a VM Ware and Real project done on it/Downloaded to a panel?
 
Yes of course, it's probably how most people do it.
Thanks for your response, But how will I be able to connect between the vm ware and HMI panel to transfer the finished project from Factory Talk ME in VM ware into the HMI Panel?
 
Yes, you can build the .mer (Application Runtime for ME projects) and transfer to your HMI panel via any number of methods.
 
Yes, you can build the .mer (Application Runtime for ME projects) and transfer to your HMI panel via any number of methods.
I appreciate your response bro. Could you please put me through on those methods to be used in transferring the .mer file into HMI Panel?
 
Sure, you can network your VMware VM to the same network as the panel and use the transfer utility.
You can create the .mer, put it on a USB key and DL to the panel that way.
You can create the .mer, put it on a separate machine that is networked to the panel and use the transfer utility.
Etc.
 

Similar Topics

Hi all, Attached below is an example of what is happening to our existing SCADA. It seems after patching some Rockwell Software that I thought...
Replies
9
Views
261
The client has an application that when communication between the PLC and the Factory Talk VIEW supervisory fails, the object in the supervisory...
Replies
5
Views
224
Hello all, I am looking for a way to have a user get logged out after an X amount of time because to default so that user privilages are no...
Replies
4
Views
506
Hello everybody. I was wondering if there is a way in FTVIEW Studio to close ) view after x min without interaction . My issue is the following...
Replies
2
Views
330
Is there a way to choose the base font in ME. Text in the Arial Unicode MS which is the default font on my FTVS doesnt show up properly on a...
Replies
1
Views
620
Back
Top Bottom