rrparker07
Lifetime Supporting Member
Good chance I'm just overthinking this. We have an existing CLX with a 1756-ENBT that has no slots available and was on the plant network VLAN. With a new project being installed, the integrators want to take the plant IP cable to the 8300. The 8300 will then have a plant network grace port, a local grace port, a local port going back to the existing CLX with a new IP, and also to local dummy switches going to various drives and other local equipment.
My questions:
1. Is this the best way to do this?
2. Will I still be able to go online with the processor via the plant network?
3. All the local IPs are 192.168.1.xxx. Can they somehow conflict with other local devices on the network?
My questions:
1. Is this the best way to do this?
2. Will I still be able to go online with the processor via the plant network?
3. All the local IPs are 192.168.1.xxx. Can they somehow conflict with other local devices on the network?