JohnCalderwood
Member
Hi All,
from time to time, we get the difficulty with a prompt for Factorytalk login on V20 of RSLogix5000
While searching for solutions that actually work, I found this:
Has anybody tried this - does it work with security login, or does it just speed up the launching of RS5000?
Just wanted to check before I tried it....cheers John
from time to time, we get the difficulty with a prompt for Factorytalk login on V20 of RSLogix5000
While searching for solutions that actually work, I found this:
FactoryTalk Services 2.50.00 (CPR9 SR5): Patch to FactoryTalk Services addressing account logins
492403 | Date Created: 05/18/2012 | Last Updated: 01/28/2015
Access Level: Everyone
Slow logins with FactoryTalk Services Platform 2.50.00 (CPR9 SR5) can cause RSLogix 5000 to take a long time to start.
Solution
The attached patch fixes the problem in SR5.
Installation
This patch is required on all machines that have FactoryTalk Services Platform installed. Two install options are provided:
An auto install (uses a Setup BAT file)
A manual install.
Has anybody tried this - does it work with security login, or does it just speed up the launching of RS5000?
Just wanted to check before I tried it....cheers John