Red Lion Crimson 3.0 Numeric Entry

giantjean

Member
Join Date
Jul 2014
Location
texas
Posts
4
I am new with Crimson and I got stuck with something.

I would like to put a numeric entry from 0-15. Then that entry multiply it by 1000 and then make a Tag the result of the multiplication. How would I do that in Crimson 3.0?

Thanks For your help,

Jean
 
I am new with Crimson and I got stuck with something.

I would like to put a numeric entry from 0-15. Then that entry multiply it by 1000 and then make a Tag the result of the multiplication. How would I do that in Crimson 3.0?

Thanks For your help,

Jean

You could scale the tag:

Go to 'data' under the tag and select 'scale to integer' in the 'data scaling' area.

Data from: 0
Data to: 15000
Display from: 0
Display to: 15

That should do it, I haven't used Crimson in a while but I think that will work.

I'm sure there are other ways.
 

Similar Topics

Hi, I am trying to increase the size of the user login pop up using a Red Lion CR1000 7” HMI with Crimson 3.1 software. The login pop up is very...
Replies
2
Views
654
Hello, We are currently running a bunch of g310's connected to their SLC5 PLCs through ethernet. I've attempted to upgrade the program from 2.0...
Replies
1
Views
1,069
Hi I have been using Red Lion products for some time, I had a thought over the bank holiday weekend, As you do. It would be nice if whenever a...
Replies
4
Views
976
Well, I have yet another question for the great minds on this forum! We have a red lion HMI for one of our machines and every time I hook my...
Replies
11
Views
1,600
Yes it's very legacy.. but sometimes it's necessary to use old stuff for fun.. and because it's so much cheaper. Crimson 3.0 had the ability to...
Replies
4
Views
1,573
Back
Top Bottom