iFix 3.5 and OPC server

asterof

Member
Join Date
May 2007
Location
Califonia
Posts
554
Trying to resurrect an old iFix 3.5 system
There is no database all the tags are dynamic tags
with indirect opc connections
So I need a little refresher here

the tags on the displays look like this
rsopc'[pxrw].SP301_VFD'

Now I am going to assume

rsopc means rslinx needs installed
pxpw is a topic

the topic in rslinx would point to a PLC
and the SP301_VFD would be the tag

Yes ? No ??
 
Additional Info

Trying to resurrect an old iFix 3.5 system
There is no database all the tags are dynamic tags
with indirect opc connections
So I need a little refresher here

the tags on the displays look like this
rsopc'[pxrw].SP301_VFD'

Now I am going to assume

rsopc means rslinx needs installed
pxpw is a topic

the topic in rslinx would point to a PLC
and the SP301_VFD would be the tag

Yes ? No ??

I was thinking of changing these to a Database
anyone know of a program that can search and replace
or search and export from the display
 

Similar Topics

Hello, I created a browser data base file (.bdb) using the Opto22 Browser Configurator 10.4 program. For communication between Opto22 and IFIX...
Replies
0
Views
609
Can anyone tell me the proper I/O address format to use for doing this? I've done this a million times with Modicon, but that driver doesn't...
Replies
1
Views
5,464
Define a technical solution to generate an iFix database that will allow customer to capture A&E data A customer want to use an OPC based program...
Replies
1
Views
2,014
'IGS.B88_QC.B88_QC.Global.U_7087X001PDS101.STS.CMF' so in this display I have links like this, now I have seen direct opc to plc before but I...
Replies
1
Views
1,972
Hi all Can any one tell me on how to communicate bristol control wave plc to ifix using opc drivers in ifix...pls...its in critical stage...
Replies
2
Views
2,262
Back
Top Bottom