michaelchan
Member
plc5 talk to HMI(hitech in taiwan),use preset message display in HMI,when bit in PLC is set 0,relative message could not be rest,for example:
b10:7/12 value is 1,relative message number(n11:9 in my pro)is 124,so HMI will display 124th message,but now when b10:7/12 is 0,n11:9 value is still 124,so confused about it...
attached is pro,hope someone can catch me and give me a hand.
Thanks.
b10:7/12 value is 1,relative message number(n11:9 in my pro)is 124,so HMI will display 124th message,but now when b10:7/12 is 0,n11:9 value is still 124,so confused about it...
attached is pro,hope someone can catch me and give me a hand.
Thanks.