Cimplicity to Siemens S7 PLC communication

DroidDr

Member
Join Date
Mar 2010
Location
Ontario
Posts
1
Hi,

I need to connect Cimplicity HMI to a S7 siements PLC.

I read a couple of threads here already. My questions are basically
1- Can I use a CImplicity driver to talk to the S7 Siemens PLC
2- If not what OPC server would you recommend as far as reliability/ price goes?

We have started using TOP server from software toolbox. This may be an option. Comments?
I know Siemens Softnet could be another. Recommended?


We are using Cimplicity 6.1 at this time.
The siemens PLC is on ethernet.
- CPU 412-2 V1.1
- CP 443-1 V2.6 for ethernet comm.

Any help would be appreciated!
Best wishes!
 

Similar Topics

Hello to all. I have been reading the forum for a bit, but I did not see a specific post for my question. I am working on integrating some...
Replies
3
Views
2,710
Hi., Can anybody tell me how to communicate with S7300 - CP343 ethernet card with Cimplicity SCADA....or any OPC server.
Replies
1
Views
3,973
I wish to know what drivers, devices or software are needed to connect a Cimplicity station with a Siemens CPU S7 314 (with CP343-1) by TCP/IP...
Replies
2
Views
2,362
Hi good day Everyone, I have a cimplicity v10 project with 7 to 8k tags communicating with AB PLC through OPC and Rslinx classic. I have this...
Replies
1
Views
80
Hi All, I am trying to program some new Versamax micro PLCs through PAC using some programs saved in our archive however whenever i go to import...
Replies
2
Views
87
Back
Top Bottom