I am rather new to the forums as far as posting. I find myself reading here quite often!
I am using a GOT2000 HMI.
I have 2 Melsec QCPU / QO3UDE PLCs networked together via on board ethernet to a ethernet switch.
I also have the GOT2000 HMI networked to the same switch to communicate to the PLC.
My question is, how do I program the GOT2000 to view each of the PLC's? Or maybe I should ask if this is possible?
I appreciate any input or guidance in this matter.
Thank you for your help!
I am using a GOT2000 HMI.
I have 2 Melsec QCPU / QO3UDE PLCs networked together via on board ethernet to a ethernet switch.
I also have the GOT2000 HMI networked to the same switch to communicate to the PLC.
My question is, how do I program the GOT2000 to view each of the PLC's? Or maybe I should ask if this is possible?
I appreciate any input or guidance in this matter.
Thank you for your help!