S7TCP driver license

Hi everyone, finally I succeded to communicate Citect 2016 with S7 1516 PLC, part number 6ES7 516-3AN01-0AB0 (firmware versión 2.1), but I am having a WARNING message . It says that I am running a restricted versión of the S7TCP driver due to it not being a final Release or it requires a license . I installed the latest S7TCP Release S7TCP (v 1.10.00.000) and still having the warning message. Do I have to buy a specific license for this driver or it is something with the firmware versión of the CPU?

Hm, I'll give an answer since nobody did. Yes, the S7TCP driver requires the purchase of a license.

Thanks

Example

There is a little example how to configuration ?


Thank you

Is the S7TCP driver expensive?
I need to use it to add an S7-1200 plc to an existing Citect 7.10 system.
Wondering if I could use Modbus instead as I only need around 50 tags

You'll have to contact your local Schneider/Citect distributor.

You'll have to weigh the cost of the driver vs. the extra programming required to implement Modbus/TCP.

thanks sigmadelta
I received a budget price from the local Citect dealer of around $1000 AUD.

I spent half a day to get the Modbus working in the S7, and learnt a bit more about programming it along the way, so I'm happy to go this way.