A FactorySQL Project is simply a collection of configured Groups. Projects are configured through the Frontend, and
are saved with a ".FSP" file extension.
Not sure if it is corrupted or a version conflict.
Error says the I/O cards are unknown and they have red question marks.
Also says the project was designed in verison 1.9 sp2 but that is the version I loaded and the version is visible in the upper right corner.
Both Bosch Rexroth (SLc) and Mitsubishi (Melsec WS) make a variant of the SICK Flexisoft controller and software. I don't know if their software use the FSP-extension. It might have been created in one of their software packages.
Both Bosch Rexroth (SLc) and Mitsubishi (Melsec WS) make a variant of the SICK Flexisoft controller and software. I don't know if their software use the FSP-extension. It might have been created in one of their software packages.
I think it is either corrupted through email or just the wrong file.
Next step is to see if they can open the file on their end first before sending it.
If they can open it , I will get them to ZIP it to stop the internet from break it up in transit.
Any passworded ZIP file is sent unbroken. Email used to corrupt the SLC500 and PLC5 files. I am just speculating this might be the case.