Displaying Historical Data on Factory Talk SE

bdossantos

Member
Join Date
Mar 2018
Location
California
Posts
67
Looking to display data from the Factory Talk historian SE 4.0 on a screen in Factory Talk SE 8.1. Was wondering if anyone has run into this problem and if it even possible.
 

Similar Topics

Hey everyone and anyone that can lend a helping hand. I have a project that I am being asked to add some animations of Solidworks or "3D" models...
Replies
8
Views
117
Using FTview ME to create an HMI screen. Simplest task is giving me trouble. How do I create an HMI tag that will allow the name of the current...
Replies
3
Views
86
Hello Folks, plc : micrologix 1500 The analog output from the loadcell is given to the plc. Using the SCP function I have scaled it into an...
Replies
3
Views
719
Hi Everyone, I am hoping a Red Lion Expert can point me in the right direction. I am experimenting with data logging on a CR3000 10" screen...
Replies
4
Views
572
I’m a bit stuck on HMI (KTP-1200) programming… See the picture attached. The PASS or FAIL box should only appear when the toggle switch is...
Replies
7
Views
1,005
Back
Top Bottom