If you want to learn properly about B&R programming, you can contact B&R Vietnam representative for information on Automation Studio training. Here is their contact, which I found on B&R website:
Duc Phong Technology & Automation Corporation
02 Duy Tan Street
Hiep Phu Ward
District 9
Ho Chi Minh City, Vietnam
Phone:+84 / 8 37360165
Fax:+84 / 8 37360166
email:
[email protected]
Technical support:
[email protected]
Website:
www.dpcvn.com
In my understanding you can upload everything from a working panel, but you may not be able to restore them back properly to a new panel. But since you want to learn and
ONLY for your learning sake, I will show you how.
I think by now you already know how to upload all other things except those under Cyclic and Exception. For these task modules you need to use Runtime Utility Center to do it. Please see the attached screenshot of the instructions you can follow.
Disclaimer: Please note that I'm writing this for your learning and
don't ask me how to RESTORE these into a new panel because there's absolutely NO guarantee you can do this. You should contact your machine maker instead.