HW Config cfg file - Asset ID (Simatic S7)

hein123

Member
H
Join Date
Aug 2010
Location
Uitenhage
Posts
93
No idea where to start to try figuring this out.
I basically want to generate a cfg file based on equipment, but can't seem to figure out how to calculate / speculate what the ASSET ID should be?

Would this be somehow possible?

STATION S7300 , "SIMATIC 300-Station"
BEGIN
ASSET_ID "1E8F843D647A4243B97D15E9F3EDF57B"
REPORT_SYSTEM_ERRORS "0"
OBJECT_REMOVEABLE "1"
POS_X "0"
POS_Y "0"
SIZE_X "0"
SIZE_Y "0"
CAX_APP_ID ""
OBJECT_COPYABLE "1"
CREATOR ""
COMMENT ""
END
Click to expand...
 

Similar Topics

L
Prosoft MVI69E-MBTCP - Config help
Hi, We have an application that has a device that goes through a reboot (appears un-graceful) What then happens is the MVI module appears to hang...
Replies
0
Views
59
lostcontrol
L
P
Siemens Scalance SC636-2C NAT config
Hi all, I have some difficulties with programming a NAT config in my Scalance SC636-2C When programming the NAT-table i'm not able to reach my...
Replies
4
Views
167
goghie
G
A
MOMENTUM HIGH SPEED COUNTER WIRING AND SOFTWARE CONFIG
Hello Folks, Has anyone configured a Momentum high speed counter on Unity 13.1. We need the wiring diagram for Momentum High speed counter and...
Replies
0
Views
73
autodepart
A
J
Prosoft MVI69-MCM Config Port
Hi everyone, I’m trying to copy the configuration from one MVI69-MCM to another. I am having no luck establishing serial comms with the device...
Replies
0
Views
80
Josh98
J
G
Powerflex 7000 and 20-comm-er config
I have 3 new PowerFlex 7000 VFD's. Rockwell was out to do some checking before startup. These are part of a larger electrical project. I gave the...
Replies
7
Views
314
Rounder
R
Back
Top Bottom