new to PLC subject, and dont know where to start

yeksm

Guest
Y
hi there,,

Anyone can give me advise where to start PlC programming, or may be start from whic brand and software,, actually I learned PLC in my school long aga, that time we using OMRON, but i almost forget it,,
Hope anyopne can help me show the perfect for starting PLC carrer..

Thanks

TOMMY
 

Similar Topics

R
Post subject: Mitsubishi PLC RS485 2W Communication to Weintek HMI..
We have two PLCs both are Mitsubishi-FX2N, and we want them to communicate to Weintek HMI MT8100ie. MT8100ie can communicate with Multiple PLC and...
Replies
1
Views
4,971
Seipy
S
N
Conveyor PLC
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Replies
3
Views
4
James Mcquade
J
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
26
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
9
Views
170
mk42
M
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
49
Alibaba07
A
Back
Top Bottom