configuration of 1794 IE8 analog input card.

dpatel

Member
Join Date
Aug 2011
Location
mi
Posts
1
Hello everybody,
I am using SLC 5/05 processor. and used with 1747- SN RIO Scanner. and used 1794 ASB adapter. used 8 modules in Rack 0 and used 6 modules in Rack 1. So, In Rack 1, word 8 I was using 1794 IB16 DC 24vdc sink input. but I am going use Position Transuder so I need 1794 IE8 analog input card. so I already swapped analog card with 1794 IB16.
So, I need to configuration for 1794 IE8 analog input card. I am using only channel 0 out of 8. my input address word I:1.8 for 1794 IB16. but right now show me only 0 for analog card. so I need to configuration by BTR and BTW for read analog values?.so can you help me please?
 

Similar Topics

I have to configure new 1794-ADN Series C in my devicenet network. I have downloaded the EDS File and registered it. But while configuration in...
Replies
3
Views
1,010
Hello everyone. I have installed a remote Flex i/o enclosure with a AENTR ethernet adapter and an 1794-IR8 RTD card. I have landed 4 RtdÂ’s on...
Replies
0
Views
773
Hello, I have Control Logix 1756-L63 processor with 1756-CNB module. On controlnet network there is Flex frequency counter 1794-IP4 module through...
Replies
0
Views
4,560
In our production plant we have multiple different networks (subnets). IT dept have setup routing between them so different subnets can...
Replies
0
Views
49
Can somebody share the AutroSafe configuration Tool C4.11.4 Thank you
Replies
1
Views
72
Back
Top Bottom