Dera bsee
Member
Hi all,
I'm designing a new HMI but I'm having problems browsing the tags. This is my first time using the CCW software. I mostly have experience with Ignition and Factory Talk view.
I added a ML1100 PLC and gave it the ip adress and used the protocol Ethernet|Allen-Bradley Micrologix/ENI
When I go to the tag editor--external tab and click adress [...] I get an error stating "No controller is selected" even though on the table -Controller- I select the ML1100. I've looked online for resources and I've been through a lot of manuals and can't figure out what's going on.
Please help...
I'm designing a new HMI but I'm having problems browsing the tags. This is my first time using the CCW software. I mostly have experience with Ignition and Factory Talk view.
I added a ML1100 PLC and gave it the ip adress and used the protocol Ethernet|Allen-Bradley Micrologix/ENI
When I go to the tag editor--external tab and click adress [...] I get an error stating "No controller is selected" even though on the table -Controller- I select the ML1100. I've looked online for resources and I've been through a lot of manuals and can't figure out what's going on.
Please help...
Last edited: