Has anyone tried upgrading an AB Micro800 PLC program from a MicroSD memory card? The Micro800 user manual says this is possible but provides very few details or examples to actually do it. I would like to send a MicroSD card to a customer and have him insert the card to upgrade the PLC. I'm not trying to upgrade the PLC firmware from AB, but instead my user application.
The user manual says you need to create a file called "ConfigMeFirst.txt" on the MicroSD card but provides very little information from there. Does anyone know exactly which files from CCW need to be copied to the MicroSD card? Is this a manual process of writing the ConfigMeFirst.txt file and copying the files or is there an AB utility to do this?
Thanks for the help!
Kevin
The user manual says you need to create a file called "ConfigMeFirst.txt" on the MicroSD card but provides very little information from there. Does anyone know exactly which files from CCW need to be copied to the MicroSD card? Is this a manual process of writing the ConfigMeFirst.txt file and copying the files or is there an AB utility to do this?
Thanks for the help!
Kevin